How to choose the right air compressor installation location

Air compressor installation needs to consider the following factors:

1. The lighting is good, and there is a large space for maintenance and operation.

2. Choose a place with low air humidity, less dust, fresh air and good ventilation, and avoid water mist, acid mist, oil mist, dust and fiber environment.

3. The heating temperature of the computer room of the compressed air station shall not be lower than 15°C, and the temperature of the computer room during non-working hours shall not be lower than 5°C.

4. When the air compressor suction port or unit cooling air suction port is located indoors, the indoor ambient temperature should not exceed 40°C.

5. If the factory environment is harsh and there is a lot of dust, it is necessary to install pre-filtration equipment to ensure the service life of the air compressor system components.

6. When the exhaust volume of a single compressed air station is ≥20m3/min and the total installed capacity is ≥60m3/min, it is advisable to set up lifting equipment for maintenance, and its lifting capacity should be determined according to the lifting position of the air compressor unit.

7. Reserve access and maintenance space. According to the displacement, the channel width between the air compressor unit and the wall is 0.8-1.5m.

Sollant Group-Professional Compressed Gas Solutions Provider