How to prevent air compressor parts from rusting?

The entire air compressor equipment will take anti-rust measures before leaving the factory. Good manufacturers will also use stainless steel in the main components. However, if the equipment parts withstand long-term use, various chemical corrosion and electrolyte corrosion will still occur. So how can we try to avoid air compressor corrosion? Are the press parts rusty?

1. Clean frequently

Clean the dust on the surface of the air compressor frequently and sweep away the dust on the surface of the air compressor. Dust and oil will squeeze the metal surface of the air compressor for a long time, causing it to corrode and rust.

2.Dehumidification protection

Use a dehumidifier to continuously extract the moist air in the room where the air compressor is placed. After the dehumidifier drying cycle, it is turned into dry air and then filled into the space where the Jaguar air compressor is placed, so that the relative humidity in the space can be maintained stably at the specified level for a long time. In the range.

3.Coating protection

Coat anti-rust materials such as paint, grease, and peelable plastics on the metal surface of the air compressor to form a protective layer of a certain thickness to prevent moisture, oxygen, etc. from contacting the metal surface of the air compressor to achieve anti-rust, anti-mildew and anti-rust Aging protection and storage methods.

4. Desiccant

It means to put a certain amount of desiccant into several small bags, place them around the air compressor, and seal the air compressor with a plastic film or other sealing material with certain water and gas barrier properties to ensure the space where the air compressor is placed. The air inside is relatively dry, thereby preventing or slowing down metal corrosion.

Sollant Focus on Energy Saving